Remove a dhcp pool, Configure dhcp pool options – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 105
7. Change the settings as needed.
For more information about the settings, see Create a DHCP pool on page 101.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Remove a DHCP pool
You can remove a DHCP pool that you no longer need.
To remove a DHCP pool:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Services > DHCP Server > DHCP Pool Configuration.
The DHCP Pool Configuration page displays.
6. From the Pool Name menu, select the pool.
7. Click the Delete button.
The pool is removed.
8. To save the settings to the running configuration, click the Save icon.
Configure DHCP pool options
You can specify information that is included in the “options” field of a DHCP message
that the switch sends.
To configure DHCP pool options:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
Main User Manual
105
Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual