beautypg.com

Delete an ipv4 pim-ssm group – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 413

background image

To add an IPv4 PIM-SSM group:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Routing > Multicast > PIM > SSM Configuration.

The SSM Configuration page displays.

6. In the SSM Group Address field, specify the source-specific multicast group IPv4

address.

7. In the SSM Group Mask field, specify the mask for the source-specific multicast

group IPv4 address.

8. Click the Add button.

Your settings are saved. The group is added.

9. To save the settings to the running configuration, click the Save icon.

Delete an IPv4 PIM-SSM group

You can delete an IPv4 PIM-SSM group that you no longer need.

To delete an IPv4 PIM-SSM group:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

Main User Manual

413

Configure Multicast Routing

AV Line of Fully Managed Switches M4250 Series Main User Manual