NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 181)

To configure or display upstream and downstream interfaces for a link dependency
group:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Link Dependency > Link Dependency Interface Configuration.
The Link Dependency Interface Configuration page displays.
6. In the Link Dependency Group ID section, from the Group ID menu, select the group
ID for which you want to display or configure the settings.
Note: The group IDs are not associated with interface numbers.
7. In the Link Dependency Interface Configuration section, select whether to display
physical interfaces, LAGs, or both by clicking one of the following links above the
table heading:
• 1: Only physical interfaces are displayed. This is the default setting.
• LAG: Only LAGs are displayed.
• All: Both physical interfaces and LAGs are displayed.
8. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the
heading row.
9. From the Downstream Interface menu, select if the interface is a member of the
group’s downstream list.
Main User Manual 181 Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual