NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 800)

Table 178. Switching features default settings (Continued)
Default Feature Name/Setting
Disabled Admin mode
5 TLV advertised interval
1 Maximum PDU receive
L2 Loop Protection, Interface
Disabled Keep alive
Disabled RX action
Routing and multicast features default
settings
The following table describes the default settings for the routing and multicast features
that you can configure.
(Nonconfigurable settings are not included in the table but might be included in the
data sheet, which you can download by visiting netgear.com/support/download/.)
Table 179. Routing and multicast features default settings
Default Feature Name/Setting
Routing Table, Route Preference
1 Static
120 RIP
IP, Global
Enabled Routing mode
64 ICMP echo replies
Disabled ICMP redirects
1000 ICMP rate limit interval
100 ICMP rate limit burst size
Not configured Global default gateway
Main User Manual 800 Software Default Settings and
Hardware Specifications
AV Line of Fully Managed Switches M4250 Series Main User Manual