Remove a radius accounting server from the switch, Tacacs+ servers – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 510
Remove a RADIUS accounting server from the switch
To remove a RADIUS
accounting server from the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > RADIUS > Accounting Server
Configuration.
The Accounting Server Configuration page displays.
6. Select the check box next to the server IP address.
7. Click the Delete button.
Your settings are saved. The RADIUS accounting server is removed.
8. To save the settings to the running configuration, click the Save icon.
TACACS+ servers
TACACS+ provides a centralized user management system, while still retaining
consistency with RADIUS and other authentication processes. TACACS+ provides the
following services:
•
Authentication: Provides authentication during login and through user names and
user-defined passwords.
•
Authorization: Performed at login. When the authentication session is completed,
an authorization session starts using the authenticated user name. The TACACS+
server checks the user privileges.
The TACACS+ protocol ensures network security through encrypted protocol exchanges
between the device and TACACS+ server.
Main User Manual
510
Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual