Router discovery and router advertisements – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 390
Note: 1 in the mask indicates a do not care in the corresponding address bit.
When an access list rule includes a destination IP address and netmask (an extended
access list), the destination IP address is compared to the network mask of the
destination of the route. The destination netmask in the access list serves as a wildcard
mask, indicating which bits in the route's destination mask are significant for the
filtering operation.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Table 107. RIP route redistribution summary information
Description
Field
The type of source route to be redistributed by RIP:
• Connected
• Static
Source Protocol
Indicates if the route for a source protocol is redistributed. By default,
route distribution is disabled.
Redistribute Mode
The metric of redistributed routes for the source route. The field displays
0 if the metric is not configured.
Metric
The access list that filters the routes to be redistributed by the destination
protocol. The field displays 0 if no ACL is configured for this purpose.
Distribute List
Indicates if an internal OSPF route is redistributed.
Match Internal
Indicates if an external type 1 OSPF route is redistributed.
Match External Type 1
Indicates if an external type 2 OSPF route is redistributed.
Match External Type 2
Indicates if an NSSA type 1 OSPF route is redistributed.
Match NSSA External Type 1
Indicates if an NSSA type 2 OSPF route is redistributed.
Match NSSA External Type 2
Router discovery and router advertisements
By default, a routing interface does not send router advertisements.You can enable the
router advertisements for a routing interface and configure the setting for the router
advertisements.
Main User Manual
390
Manage Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual