beautypg.com

Sflow agent overview, Configure the source interface for the sflow agent – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 726

background image

sFlow agent overview

Packet flow sampling and counter sampling are performed by sFlow instances associated
with individual data sources within the sFlow agent. Packet flow samples and counter
samples are combined in sFlow datagrams. Packet flow sampling causes a steady but
random stream of sFlow datagrams to be sent to the sFlow collector. Counter samples
can be taken opportunistically to fill these datagrams.

To perform packet flow sampling, you must configure an sFlow sampler instance with
a sampling Rate. To perform counter sampling, you must configure an sFlow poller
instance with a polling interval. The sFlow agent sends the collected information in the
form of sFlow datagrams to sFlow collectors to the sFlow receiver.

Configure the source interface for the sFlow agent

The switch can function as an sFlow agent and forward polled and sampled traffic to an
sFlow receiver. You can configure the source interface that connects to the device that
functions as the sFlow receiver.

To configure the source interface for the sFlow agent:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Monitoring> sFlow > Basic > sFlow Agent Information.

The sFlow Agent Information page displays.

6. From the Source Interface menu, select the management interface that the sFlow

agent must use:

• None: The primary IP address of the originating (outbound) interface is used as

the source address.

• Routing interface: The primary IP address of a physical port is used as the source

address.

Main User Manual

726

Monitor the Switch and Network

AV Line of Fully Managed Switches M4250 Series Main User Manual