NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 667)

Note: An implicit deny all rule is included at the end of an ACL list. This means that if
an ACL is applied to a packet, and if none of the explicit rules match, then the final
implicit deny all rule applies and the packet is dropped.
Add a rule for a basic IPv4 ACL To add a rule for a basic IPv4 ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Advanced > IP Rules.
If no rules exists, the Basic ACL Rule Table shows the message No rules have been
configured for this ACL . If one or more rule exists for the ACL, the rules display in
the Basic ACL Rule Table.
6. From the ACL ID menu, select the IP ACL for which you want to add or a change a
rule.
For basic IP ACLs, this must be an ID in the range from 1 to 99.
Main User Manual 667 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual