NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 85)

Remove an entry from the dynamic host mapping table To remove an
entry from the dynamic host mapping table:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Management > DNS > Host Configuration.
The Host Configuration page displays.
6. Select the check box next to the entry that you want to remove.
7. Click the Delete button.
The entry is removed.
8. To save the settings to the running configuration, click the Save icon.
Change the host name or IP address in an entry of the dynamic host
mapping table, view all entries, or clear all entries
To change the host name
or IP address in an entry of the dynamic host mapping table, view all entries, or clear
all entries:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual 85 Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual