NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 477)

• Reference Class: Select this radio button to reference another class for criteria.
The match criteria defined in the reference class function as match criteria in
addition to the match criteria that you define for the selected class. After selecting
this option, the classes that can be referenced are displayed. Select the class to
reference. A class can reference one other class of the same type.
• Protocol Type: Select this radio button to require a packet’s Layer 4 protocol to
match the specified protocol, which you must select from the menu. The menu
includes Other as a selection, which lets you enter a protocol number from 0 to
255.
• Source Prefix/Length: Select this radio button to require a packet’s source prefix
and prefix length to match the specified source IPv6 prefix and prefix length. Prefix
must always be specified with the prefix length. The prefix can be in the
hexadecimal range from 0 to FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF and
the prefix length can be in the range from 0 to 128.
• Source L4 Port: Select this radio button to require a packet’s TCP/UDP source
port to match the specified protocol, which you must select from the menu. The
range is 0 to 65535. The menu includes Other as an option for unnamed ports.
• Destination Prefix/Length: Select this radio button to require a packet’s
destination prefix and prefix length to match the specified source IPv6 prefix and
prefix length. Prefix must always be specified with the prefix length. The prefix
can be in the hexadecimal range from 0 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF and the prefix length can be in the
range from 0 to 128.
• Destination L4 Port: Select this radio button to require a packet’s TCP/UDP
destination port to match the specified protocol, which you must select from the
menu. The range is 0 to 65535. The menu includes Other as an option for unnamed
ports.
• Flow Label: Select this radio button to require a packet’s flow label to match the
specified flow label. The flow label is a 20-bit number that is unique to an IPv6
packet and that is used by end stations to signify QoS handling in routers. The
flow label can be specified in the range from 0 to 1048575.
• IP DSCP: Select this radio button to require the packet’s IP DiffServ Code Point
(DSCP) value to match the specified IP DSCP keyword code, which you must select
from the menu. The menu includes Other as a selection, which lets you enter an
IP DSCP value from 0 to 63. The DSCP value is defined as the high-order 6 bits of
the Service Type octet in the IP header.
11. Click the Apply button.
Your settings are saved.
12. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable information displayed in the Class
Summary section.
Main User Manual 477 Configure Quality of Service
AV Line of Fully Managed Switches M4250 Series Main User Manual