NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 672)

7. Click the Add button.
8. Configure the following options for the rule:
• Sequence Number: Enter a number in the range from 1 to 2147483647 that is
used to identify the rule. An extended IP ACL can contain up to 1023 rules.
• Action: Select the ACL forwarding action, which is one of the following:
• Permit: Forward packets that meet the ACL criteria.
Egress Queue: If the selection from the Action menu is Permit, select the
hardware egress queue identifier that is used to handle all packets matching
this IP ACL rule. The range of queue IDs is 0 to 7.
• Deny: Drop packets that meet the ACL criteria.
This option is available if the selection from the Action menu is Deny.
If you select Enable, logging is enabled for this ACL rule (subject to resource
availability on the switch).
If the access list trap flag is also enabled, periodic traps are generated,
indicating the number of times the rule was evoked during the report interval,
which is fixed at five minutes.
• Interface: For a Permit action, use either a mirror interface or a redirect interface:
• Select the Mirror radio button and use the menu to specify the egress interface
to which the matching traffic stream is copied, in addition to being forwarded
normally by the device.
Main User Manual 672 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual