NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 408)

8. In the Unsolicited Report Interval field, specify the period in seconds between
repetitions of a host's initial report of membership in a group.
The range is from 1 to 260. The default is 1.
9. Click the Apply button.
Your settings are saved.
10. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Table 114. IGMP proxy interface configuration information
Description Field
The IP address of the IGMP proxy interface. IP Address
The subnet mask for the IP address of the IGMP proxy interface. Subnet Mask
The operational state of IGMP proxy interface (Disable or Enable). Operational Mode
The querier address on the proxy interface. Querier Address on Proxy
Interface
The number of multicast group entries for the IGMP proxy interface in
the cache table. Number of Groups
The version of IGMP that is configured on the IGMP routing interface that
you changed into the IGMP proxy interface. For more information, see
Configure an IGMP routing interface on page 400. Version
The IGMPv1 querier time-out period in seconds.
If a host receives an IGMPv1 query, the host temporarily sets its IGMPv1
querier present timer to the IGMPv1 querier Interval. After the host reads
the IGMPv1 query, the IGMPv1 querier time-out indicates the period after
which the host transitions back to IGMPv3. Version 1 Querier Timeout
The IGMPv2 querier time-out period in seconds.
If a host receives an IGMPv2 query, the host temporarily sets its IGMPv2
querier present timer to the IGMPv2 querier Interval. After the host reads
the IGMPv2 query, the IGMPv2 querier time-out indicates the period after
which the host transitions back to IGMPv3. Version 2 Querier Timeout
The number of times the proxy was started. Proxy Start Frequency
Display the statistics for the IGMP proxy interface
You can display the statistics for the IGMP proxy interface.
Main User Manual 408 Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual