Add an ipv6 acl – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 680
You can display or delete IPv6 ACL configurations in the IP ACL Binding table (see
Display or delete IP ACL bindings in the IP ACL binding table on page 690).
Add an IPv6 ACL
To add an IPv6 ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Advanced > IPv6 ACL.
The IPv6 ACL page displays.
6. In the IPv6 ACL field, specify a name to identify the IPv6 ACL.
This is the IPv6 ACL name string, which includes up to 31 alphanumeric characters
only. The name must start with an alphabetic character.
7. Click the Add button.
The IPv6 ACL is added to the switch configuration.
8. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable information that is displayed.
Table 163. IPv6 ACL information
Description
Field
The current number of ACLs configured on the switch.
Current Number of ACL
The maximum number of IP ACLs that can be configured on the switch.
Maximum ACL
Main User Manual
680
Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual