beautypg.com

Industry standard discovery protocol, Configure the global isdp settings – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 183

background image

To clear all interfaces in a link dependency group:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Link Dependency > Link Dependency Interface Configuration.

The Link Dependency Interface Configuration page displays.

6. In the Link Dependency Group ID section, from the Group ID menu, select the group

ID for which you want to display or configure the settings.
The range for the group ID is from 1 to 16.

Note: The group IDs are not associated with interface numbers.

7. Click the Clear button.

The interfaces are removed from the group.

8. To save the settings to the running configuration, click the Save icon.

Industry Standard Discovery Protocol

Industry Standard Discovery Protocol (ISDP) is a protocol that enables devices to share
information in a network.

You can configure the global and interface settings for ISDP.

Configure the global ISDP settings

You can configure the ISDP settings that apply globally to the switch.

Main User Manual

183

Configure Switch System
Information

AV Line of Fully Managed Switches M4250 Series Main User Manual