NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 70)

Table 16. SNTP global status information (Continued)
Description Field
The status of the last SNTP request or unsolicited message for both unicast and
broadcast modes. If no message was received from a server, a status of Other
is displayed. These values are appropriate for all operational modes.
• Other: None of the following enumeration values.
• Success: The SNTP operation was successful and the system time was updated.
• Request Timed Out: A directed SNTP request timed out without receiving a
response from the SNTP server.
• Bad Date Encoded: The time provided by the SNTP server is not valid.
• Version Not Supported: The SNTP version supported by the server is not
compatible with the version supported by the client.
• Server Unsynchronized: The SNTP server is not synchronized with its peers.
This is indicated through the leap indicator field on the SNTP message.
• Server Kiss Of Death: The SNTP server indicated that no further queries were
to be sent to this server. This is indicated by a stratum field equal to 0 in a
message received from a server.
Last Attempt Status
The IP address of the server for the last received valid packet. If no message was
received from any server, an empty string is shown.
Server IP Address
The address type of the SNTP server address for the last received valid packet. Address Type
The claimed stratum of the server for the last received valid packet. Server Stratum
The reference clock identifier of the server for the last received valid packet. Reference Clock ID
The mode of the server for the last received valid packet. Server mode
The maximum number of unicast server entries that can be configured on this
client.
Unicast Server Max Entries
Main User Manual 70 Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual