NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 704)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Monitoring > Ports > EAP Statistics.
The EAP Statistics page displays.
6. To refresh the page, click the Refresh button.
7. To clear the counters, which resets the EAP and EAPoL statistics to default values,
take one of the following actions:
• To clear the counters for a specific port, select the check box associated with the
port, and click the Clear button.
• To clear the counters for multiple ports, select the check boxes associated with
the ports, and click the Clear button.
• To clear all counters for all ports, select the check box in the row heading, and
click the Clear button.
8. To save the settings to the running configuration, click the Save icon.
The following table describes the EAP statistics displayed on the page.
Table 168. EAP Statistics information
Description Field
The port number. Port
The PAE capabilities of the port. PAE Capabilities
The number of valid EAPOL frames of any type that were received by this
authenticator. EAPOL Frames Received
The number of EAPOL frames of any type that were transmitted by this
authenticator. EAPOL Frames Transmitted
The number of EAPOL start frames that were received by this authenticator. EAPOL Start Frames
Received
The number of EAPOL logoff frames that were received by this authenticator. EAPOL Logoff Frames
Received
The protocol version number carried in the most recently received EAPOL
frame. EAPOL Last Frame Version
The source MAC address carried in the most recently received EAPOL frame. EAPOL Last Frame Source
Main User Manual 704 Monitor the Switch and Network
AV Line of Fully Managed Switches M4250 Series Main User Manual