NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 420)

Table 119. IPv4 PIM BSR candidate configuration information
Description Field
The time (in hours, minutes and seconds) after which the learned elected
BSR expires.
BSR Expiry Time (hh:mm:ss)
The IPv4 address of the elected BSR. IP Address
The time (in hours, minutes, and seconds) after which the next bootstrap
message is due from the BSR.
Next bootstrap Message
(hh:mm:ss)
The time (in hours, minutes, and seconds) after which the next candidate
RP advertisement is sent.
Next Candidate RP Advertisement
(hh:mm:ss)
Delete an IPv4 PIM bootstrap router candidate configuration
You can delete an IPv4 PIM bootstrap router (BSR) candidate configuration from an
interface.
To delete an IPv4 PIM BSR candidate configuration from an interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > PIM > BSR Candidate Configuration.
The BSR Candidate Configuration page displays.
6. From the Interface menu, select the interface.
7. Click the Delete button.
Your settings are saved. The PIM BSR candidate configuration is deleted from the
interface.
Main User Manual 420 Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual