Remove a vlan acl binding – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 693
than the highest sequence number currently in use for the VLAN ID and direction is
used. The range is from 1 to 4294967295.
9. From the ACL Type menu, select the type of ACL.
You can select a MAC ACL, IP ACL, or IPv6 ACL.
10. From the ACL ID list, select the ID or name of the ACL that must be bound to the
specified VLAN.
11. Click the Add button.
The VLAN ACL binding is added.
12. To save the settings to the running configuration, click the Save icon.
Remove a VLAN ACL binding
To remove a VLAN ACL binding:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Advanced > VLAN Binding Table.
The VLAN Binding Table page displays.
6. Select the check box for the VLAN binding that you want to remove.
7. Click the Delete button.
The VLAN ACL binding is removed.
8. To save the settings to the running configuration, click the Save icon.
Main User Manual
693
Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual