NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 167)

The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > LLDP > Remote Device Information.
The Remote Device Information page displays.
6. From the Interface menu, select an interface on which the reception of LLDP frames
is enabled.
7. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable fields on the page.
Table 43. LLDP remote device information
Description Field
The ID of the remote device. Remote ID
The MAC address of the remote device. Switch ID
The switch identifier is the MAC address of the remote device (see the
previous field).
Switch ID Subtype
The identifier that is associated with the interface on the remote device. Port ID
The type of the port identifier on the remote device. Port ID Subtype
The system name, if any, of the remote device. System Name
The description of the remote device. System Description
The interface name, if any, of the interface on the remote device. Port Description
The system capabilities that are supported on the remote device. System Capabilities Supported
The system capabilities that are enabled on the remote device. System Capabilities Enabled
The time-to-live period in seconds of the received remote entry. Time to Live
Main User Manual 167 Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual