NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 611)

Add a static DHCPv6 binding and display dynamic DHCPv6
bindings
You can add a static binding in the DHCPv6 snooping bindings database and display
or clear the dynamic bindings in the bindings table.
To add a static DHCPv6 binding and display or clear the dynamic bindings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Control > DHCPv6 Snooping > Binding Configuration.
The Binding Configuration page displays.
6. From the Interface menu, select the interface.
7. In the MAC Address field, specify the MAC address for the binding to be added.
This is the key to the binding database.
8. From the VLAN ID menu, select the ID of the VLAN.
9. In the IPv6 Address field, specify the IPv6 address for the binding to be added.
10. Click the Add button.
The DHCPv6 snooping binding entry is added to the database.
The Dynamic Binding Configuration table shows information about the DHCPv6
bindings that were learned on each interface on which DHCPv6 snooping is enabled.
The following table describes the dynamic binding information.
Description Field
The interface on which the DHCPv6 client message was received. Interface
The MAC address associated with the DHCPv6 client that sent the message. This
is the key to the binding database.
MAC Address
Main User Manual 611 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual