beautypg.com

Configure an igmp routing interface – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 400

background image

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Routing > Multicast > IGMP > Global Configuration.

The Global Configuration page displays.

6. Select the Admin Mode Enable or Disable radio button to enable or disable IGMP

on the switch.
The default is Disable.

7. Click the Apply button.

Your settings are saved.

8. To save the settings to the running configuration, click the Save icon.

Configure an IGMP routing interface

You can configure one or more IGMP routing interfaces.

To configure an IGMP routing interface:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select the Routing > Multicast > IGMP > Routing Interface Configuration.

The Routing Interface Configuration page displays.

6. Select whether to display physical interfaces, VLANs, or both by clicking one of the

following links above the table heading:

Main User Manual

400

Configure Multicast Routing

AV Line of Fully Managed Switches M4250 Series Main User Manual