NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 3)

(Continued)
Comments Publish Date Publication Part
Number
We changed the following sections:
Log in to the main UI with a web browser on page 24
Log in to the main UI using the switch default IP address on page 25
Configure the IPv4 service port on page 48
Add an SNMPv3 user account on page 158
Configure user password requirements on page 497
Configure the HTTPS access settings on page 526
Manage certificates for HTTPS access on page 528
Generate an SSL certificate on page 529
Delete an SSL certificate on page 531
Transfer an existing HTTPS certificate from a server to the switch on page
531 November 2021 202-12091-03
We added the following sections:
Display the status of the SSL certificates on page 528
Activate a certificate on page 530
We made other minor changes.
We published the manual in a new format.
This second publication is a major revision. March 2021 202-12091-02
We added the following:
Information about the 24-port PoE+ and PoE++ models and the 40-port
PoE+ and PoE++ models (see Supported switches on page 23).
Information about the Auto-Trunk feature (see Auto-Trunk overview on
page 194 and Enable or disable Auto-Trunks on page 195).
Information about the Auto-LAG feature (see Auto-LAG overview on page
302, Enable or disable Auto-LAGs on page 303, and Configure the hash
mode for Auto-LAGs on page 304).
We revised a very large part of the manual and added multiple new
sections to provide more complete and correct information.
We replaced the old appendix with defaults setting with a new one that
also includes hardware specifications (see Software Default Settings and
Hardware Specifications on page 784).
We made multiple corrections throughout the entire manual.
First publication. October 2020 202-12091-01
3
AV Line of Fully Managed Switches M4250 Series Main User Manual