NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 406)

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > IGMP > IGMP Membership.
The IGMP Membership page displays.
6. To search for IGMP membership by interface or group, select one of the following
options from the Search menu:
• Interface: Select Interface from the menu, specify the interface in unit/port format
(for example 0/8), and click the Go button.
If the entry exists, the entry is displayed as the first entry, followed by the remaining
entries.
• Group: Select Group from the menu, specify the multicast group IP address, and
click the Go button.
If the entry exists, that entry with the matching group IP address is displayed as
the first entry, followed by the remaining entries. An exact match is required.
7. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable fields on the page.
Table 113. IGMP membership information
Description Field
The interface on which multicast packets are forwarded. Interface
The IP multicast group address. Group IP
The group compatibility mode (v1, v2, or v3) for the group on the interface. Compatibility Mode
The source filter mode (Include, Exclude, or NA) for the group on the interface.
If the mode is NA, the field is blank.
Source Filter Mode
Main User Manual 406 Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual