NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 647)

Use the ACL Wizard to create a simple ACL
The ACL Wizard helps you create a simple ACL and apply it to the selected ports easily
and quickly. First, select an ACL type to use when you create an ACL. Then add an ACL
rule to this ACL and apply this ACL on the selected ports.
Note: The steps in the following procedure describe how you can create an ACL based
on the destination MAC address. If you select a different type of ACL (or example, an
ACL based on a source IPv4), the page displays different information.
Use the ACL Wizard to create an ACL To use the ACL Wizard to create an ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > ACL Wizard.
The previous figure shows the page for a 12-port model.
Main User Manual 647 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual