beautypg.com

NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 213

background image

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Switching > VLAN > Advanced > Port DVLAN Configuration.

The Port DVLAN Configuration page displays.

6. From the Global EtherType menu, select a tag type that determines the first 16 bits

of the DVLAN tag:

• 802.1Q Tag: The dot1q tag that represents 0x8100.
• vMAN Tag: The virtual metropolitan area network (vMAN) tag that represents

0x88A8.

• Custom Tag: A custom EtherType tag in the range from 0 to 65535. With this

selection the Custom Value field displays.

7. if you select Custom Tag from the Global EtherType menu, enter the custom

EtherType tag in the Custom Value field.
The tag can be in the range from 0 to 65535.

8. Select whether to display physical interfaces, LAGs, or both by clicking one of the

following links above the table heading:

• 1: Only physical interfaces are displayed. This is the default setting.
• LAG: Only LAGs are displayed.
• All: Both physical interfaces and LAGs are displayed.

9. Select one or more interfaces by taking one of the following actions:

To configure a single interface, select the check box associated with the interface,

or type the interface number in the Go To Interface field and click the Go button.

To configure multiple interfaces with the same settings, select the check box

associated with each interface.

To configure all interfaces with the same settings, select the check box in the

heading row.

10. From the Admin Mode menu, select Enabled or Disabled to specify if the selected

DVLAN tag is added to frames that are processed on the interface.
The default is Disabled and the selected DVLAN tag is not added to frames.

Main User Manual

213

Configure Switching Information

AV Line of Fully Managed Switches M4250 Series Main User Manual