NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 713)

• Routing VLAN: The primary IP address of a VLAN routing interface is used as the
source address.
• Routing loopback interface: The primary IP address of a routing loopback
interface is used as the source address.
• Tunnel interface: The IPv6 tunnel interface.
• Service port: The management port source IP address is used as the source
address.
By default, VLAN 1 is used as the source interface.
Note: The syslog function on the switch can save the log messages simultaneously
to a remote server and to a USB storage device.
9. To simultaneously save the log messages to a USB storage device, in the USB
Filename field, specify the name of the USB file.
The filename cannot include the following symbols: V:*?”<>!. Up to 64 characters
can be entered. The 64 characters are only the filename length, the extension is
automatically added.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Table 170. Syslog configuration information
Description Field
The number of messages received by the log process. This includes messages
that are dropped or ignored. Messages Received
The number of syslog messages relayed. Messages Relayed
The number of syslog messages ignored. Messages Ignored
Add a syslog server
To add a syslog server:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
Main User Manual 713 Monitor the Switch and Network
AV Line of Fully Managed Switches M4250 Series Main User Manual