NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 200)

5. Select Switching > VLAN > Advanced > VLAN Membership.
The previous figure shows the page for a model with 12 ports. Depending on your
switch model, the Ports icon (above the Ports table) might show as the Unit 1 icon.
6. From the VLAN ID menu, select the VLAN ID.
7. To add or remove all ports and LAGs simultaneously (you can also select them
individually), select one of the following options from the Group Operation menu:
• Untag All: All ports and LAGs are added as untagged members of the VLAN.
• Tag All: All ports and LAGs are added as untagged members of the VLAN.
• Remove All: All ports and LAGs are excluded from the VLAN
8. In the Ports table, click a port once, twice, or three times to configure one of the
following modes:
• T (tagged) member: The port is added as a tagged member of the VLAN.
• U (untagged) member: The port is added as an untagged member of the VLAN.
• Excluded member: By default, the selection is blank, which means that the port
is excluded from the VLAN. A port that is excluded can still be dynamically added
to the VLAN through GVRP.
9. In the LAG table, click a LAG once, twice, or three times to configure one of the
following modes:
Main User Manual 200 Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual