beautypg.com

NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 273

background image

To configure the MLD snooping settings for interfaces:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Switching > Multicast > MLD Snooping > Interface Configuration.

The Interface Configuration page displays.

6. Select whether to display physical interfaces, LAGs, or both by clicking one of the

following links above the table heading:

• 1: Only physical interfaces are displayed. This is the default setting.
• LAG: Only LAGs are displayed.
• All: Both physical interfaces and LAGs are displayed.

7. Select one or more interfaces by taking one of the following actions:

To configure a single interface, select the check box associated with the interface,

or type the interface number in the Go To Interface field and click the Go button.

To configure multiple interfaces with the same settings, select the check box

associated with each interface.

To configure all interfaces with the same settings, select the check box in the

heading row.

8. From the Admin Mode menu, select to enable or disable MLD snooping for the

interface.
The default is Disable.

9. In the Membership Interval field, specify the time that the switch must wait for a

report for a particular group on a particular interface before it deletes that interface
from the group.
The valid range is from 2 to 3600 seconds. The configured value must be greater
than the maximum response time. The default is 260 seconds.

Main User Manual

273

Configure Switching Information

AV Line of Fully Managed Switches M4250 Series Main User Manual