beautypg.com

Diffserv wizard overview – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 465

background image

can be defined on a per-class instance basis, and it is these attributes that are applied
when a match occurs.

The configuration process begins with defining one or more match criteria for a
class. Then one or more classes are added to a policy. Policies are then added to
interfaces.

Packet processing begins by testing the match criteria for a packet. The All class type
option specifies that each match criteria within a class must evaluate to true for a packet
to match that class. The Any class type option specifies that at least one match criteria
must evaluate to true for a packet to match that class. Classes are tested in the order in
which they were added to the policy. A policy is applied to a packet when a class match
within that policy is found.

DiffServ wizard overview

The DiffServ wizard enables DiffServ on the switch by creating a traffic class, adding the
traffic class to a policy, and then adding the policy to the ports that you select. The
DiffServ wizard does the following:

Creates a DiffServ class and defines match criteria used as a filter to determine if
incoming traffic meets the requirements to be a member of the class.

Sets the DiffServ class match criteria based on traffic type selection as follows:

-

VOIP: Sets the match criteria to UDP protocol.

-

HTTP: Sets the match criteria to HTTP destination port.

-

FTP: Sets match criteria to FTP destination port.

-

Telnet: Sets the match criteria to Telnet destination port.

-

Every: Sets the match criteria for all traffic.

Create a Diffserv policy and add it to the DiffServ class created.

Marks traffic as follows:

-

Policing enabled: If policing is enabled, the DiffServ policy style is set to simple.
Traffic that conforms to the class match criteria is processed according to the
outbound priority selection. The outbound priority configures the handling of
conforming traffic as follows:

-

High: Sets the policing action to markdscp ef.

-

Medium: Sets the policing action to markdscp af31.

-

Low: Sets the policing action to send.

Main User Manual

465

Configure Quality of Service

AV Line of Fully Managed Switches M4250 Series Main User Manual