NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 432
The default is Disable.
12. In the DR Priority field, specify the designated router (DR) priority for the interface.
The range is from 0 to 2147483647. The default is 1.
13. Click the Apply button.
Your settings are saved.
14. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable field on the page.
Table 121. IPv6 PIM interface configuration information
Description
Field
The state of PIM on the interface (Operational or Non-Operational).
Protocol State
The IPv6 address and prefix length of the PIM interface.
IPv6 Prefix/Length
The IPv6 address of the designated router on the PIM interface.
Designated Router
The number of PIM neighbors on the PIM interface.
Neighbor Count
Display IPv6 PIM neighbors and search the PIM neighbor
database
You can display the IPv6 PIM neighbor information and search the PIM neighbors
database by interface or by neighbor IP address.
To display IPv6 PIM neighbors and search the PIM neighbors database:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual
432
Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual