NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 59)

Table 14. Current IPv6 management interface status information (Continued)
Description Field
Indicates if IPv6 routing is enabled or disabled on the IPv6 management
interface. IPv6 Routing Mode
Indicates if the IPv6 address autoconfiguration mode is enabled or
disabled on the IPv6 management interface. Stateless Address Autoconfig
Mode
Indicates if the DHCPv6 Client Mode is enabled or disabled on the IPv6
management interface. DHCPv6 Client Mode
The IPv6 address of the default gateway of the switch. IPv6 Default Gateway
The IPv6 address of the next hop interface of the switch. IPv6 Next Hop Interface
The IPv6 prefix and prefix length that is used for the IPv6 management
interface. IPv6 Prefix/Prefix Length
The EUI-64 flag of the IPv6 address on the IPv6 management interface. EU164
The current state of the IPv6 address on the IPv6 management interface. Current State
Manage IPv6 addresses for the IPv6 management VLAN
You can add a static IPv6 address that is specific to the IPv6 management VLAN. You
can also remove an IPv6 address that you no longer need for the IPv6 management
VLAN.
To add or remove an IPv6 address for the IPv6 management VLAN:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Management > Management Interfaces > IPv6 Management
VLAN Configuration.
The IPv6 Management VLAN Configuration page displays.
Main User Manual 59 Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual