NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 617)

10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
Add a static IP source guard binding and display dynamic
IP source guard bindings
You can add a static binding in the IP source guard (IPSG) bindings database and display
or clear the dynamic bindings in the bindings table.
To add a static IPSG binding and display or clear the dynamic bindings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Control > IP Source Guard > Binding Configuration.
The Binding Configuration page displays.
6. From the Interface menu, select the interface.
7. In the MAC Address field, specify the MAC address for the binding to be added.
This is the key to the binding database.
8. From the VLAN ID menu, select the ID of the VLAN.
9. In the IP Address field, specify the IP address for the binding to be added.
10. Click the Add button.
The IPSG static binding entry is added to the database.
The Filter Type field displays if IPSG is configured to function with the source IP
address only or, if port security is also enabled for IPSG, with both the source IP
address and MAC address.
Main User Manual 617 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual