Delete a mac-based vlan configuration, Configure a protocol-based vlan group – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 206
7. In the VLAN ID field, specify the VLAN ID in the range of 1 to 4093.
8. Click the Add button.
The MAC-based VLAN configuration is added.
9. To save the settings to the running configuration, click the Save icon.
Delete a MAC-based VLAN configuration
To delete a MAC-based VLAN
configuration:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > VLAN > Advanced > MAC Based VLAN.
The MAC Based VLAN page displays.
6. Select the check box for the MAC-based VLAN configuration
7. Click the Delete button.
The MAC-based VLAN configuration is deleted.
8. To save the settings to the running configuration, click the Save icon.
Configure a protocol-based VLAN group
You can use a protocol-based VLAN to define filtering criteria for untagged packets.
By default, if you do not configure a port-based (IEEE 802.1Q) or protocol-based VLAN,
untagged packets are assigned to VLAN 1. You can override this behavior by defining
either port-based VLANs or protocol-based VLANs, or both. Tagged packets are always
handled according to the IEEE 802.1Q standard, and are not included in protocol-based
VLANs.
If you assign an interface to a protocol-based VLAN for a specific protocol, untagged
frames received on the interface for that protocol are assigned the protocol-based VLAN
ID. Untagged frames received on the interface for other protocols are assigned the Port
Main User Manual
206
Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual