NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 722)

8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Configure the switch as an RSPAN source switch
You can configure the switch as an RSPAN source switch that sends traffic to another
switch that functions as an RSPAN destination switch.
You can create up to four RSPAN source switch configurations.
To configure the switch as an RSPAN source switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Monitoring > Mirroring > RSPAN Source Switch Configuration.
The RSPAN Source Switch Configuration page displays.
6. From the Session ID menu, select 1, 2, 3, or 4 as the RSPAN source switch session
ID.
You can set up four RSPAN source switch configurations that functions independently
from each other.
7. Enable or disable the RSPAN source switch configuration by selecting one of the
following Admin Mode radio buttons:
• True: The selected source interfaces are mirrored. That is, traffic entering or
leaving the source interfaces is copied (mirrored) to the selected RSPAN destination
VLAN.
• False: The selected source interfaces are not mirrored.
8. From the RSPAN Destination VLAN menu, select the destination VLAN to which
traffic must be copied.
Main User Manual 722 Monitor the Switch and Network
AV Line of Fully Managed Switches M4250 Series Main User Manual