NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 310)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > 802.1AS > Basic > 802.1AS Configuration.
The 802.1AS Configuration page displays.
6. To enable the feature, select the 802.1AS status Enable radio button.
7. In the Local Clock Priority1 field, specify the first priority value of the local clock.
The local clock is the clock for the switch as a time-aware bridge. Enter a number
between 0 and 255 seconds. The default is 255 seconds.
8. In the Local Clock Priority2 field, specify the second priority value of the local clock.
Enter a number between 0 and 255 seconds. The default is 248 seconds.
9. Click the Apply button.
Your settings are saved.
10. To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable information displayed on the page.
Table 81. 802.1AS configuration information
Description Field
Identifies whether the grandmaster clock is active. The default is False. GrandMaster Capable
The MAC address of the best clock that the switch detected. Best Clock Identity
The first priority value of the best clock that the switch detected. Best Clock Priority1
The second priority value of the best clock that the switch detected. Best Clock Priority2
The number of links between the best clock and the switch. If the switch itself
is the best clock, the value is zero. Steps to Best Clock
The MAC address of the local clock on the switch. Local Clock Identity
Main User Manual 310 Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual