Deactivate an access profile – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 550
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Access > Access Control > Access Profile Configuration.
The Access Profile Configuration page displays.
The Packets Filtered field displays the number of packets filtered.
6. To refresh the page with the latest information about the switch, click the Refresh
button.
The following table describes the nonconfigurable data that is displayed.
Table 148. Access profile configuration profile summary
Description
Field
The action performed when the rules match.
Rule Type
The service type selected. The policy is restricted by the selected service type.
Service Type
The source IP address of the client originating the management traffic.
Source IP Address
The subnet mask of the IP Address.
Mask
The priority of the rule.
Priority
Deactivate an access profile
You can deactivate an access profile.
To deactivate an access profile:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
Main User Manual
550
Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual