NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 56)

3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Management > Management Interfaces > IPv6 Service Port
Configuration.
The IPv6 Service Port Configuration page displays.
The Add/Delete IPv6 Address table lists the static IPv6 addresses that you manually
added to the service port interface.
6. To add an IPv6 address, in the Add/Delete IPv6 Address section, do the following:
a. In the IPv6 Address field, specify the IPv6 address that you want to add.
b. From the EUI FLAG menu, select True to enable the Extended Universal Identifier
(EUI) flag for the IPv6 address, or select False to omit the flag.
c. Click the Add button.
The IPv6 address is added to the IPv6 service port.
7. To remove an IPv6 address, in the Add/Delete IPv6 Address section, do the following:
a. Select the check box for the IPv6 address that you want to remove.
b. Click the Delete button.
The IPv6 address is removed from the IPv6 service port.
8. To save the settings to the running configuration, click the Save icon.
Configure an IPv6 management VLAN
For you to manage the switch over the main UI, you must define the management IP
address. A management VLAN interface is created by default and it gets an IP address
if a DHCP server is present. If the management VLAN interface cannot get an IP address,
the automatically assigned fallback IPv4 address is 169.254.100.100 and the subnet
mask is 255.255.0.0.
A management VLAN is used as the default source interface for the syslog, the message
log, an SNMP client, and so on. The network interface is disabled by default.
Main User Manual 56 Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual