NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 801)

Table 179. Routing and multicast features default settings (Continued)
Default Feature Name/Setting
IP, Interface
None IP address configuration method
None IP address
None Subnet mask
Disabled Routing mode
Enabled Administrative mode
Disabled Forward net directed broadcasts
Ethernet Encapsulation type
Enabled Proxy ARP
Disabled Local proxy ARP
1000000 for a 1 Gbps link that is up. (The
bandwidth is automatically assigned but you can
change it.) Bandwidth
Enabled ICMP destination unreachables
Disabled ICMP redirects
1500 IP MTU
IP, Secondary IP
None Secondary IP address
None Secondary IP subnet mask
IPv6, Global
Disabled IPv6 unicast routing
64 Hop limit
1000 ICMPv6 rate limit error interval
100 ICMPv6 rate limit burst size
IPv6, Interface
Disabled IPv6 mode
Disabled DHCPv6 Client mode
Disabled Stateless Address AutoConfig mode
Main User Manual 801 Software Default Settings and
Hardware Specifications
AV Line of Fully Managed Switches M4250 Series Main User Manual