Remove an existing private vlan association, Configure the private vlan port mode – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 581
Table 154. Private VLAN Association
Description
Field
The single isolated VLAN associated with the selected primary VLAN.
Isolated VLAN
The list of community VLANs associated with the selected primary VLAN.
Community VLAN(s)
Remove an existing private VLAN association
You can remove a private VLAN association that you no longer need.
To remove a private VLAN association:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Traffic Control > Private VLAN > Private VLAN Association
Configuration.
The Private VLAN Association Configuration page displays.
6. Select the check box for the private VLAN association.
7. Click the Delete button.
Your settings are saved. The private VLAN association is removed.
8. To save the settings to the running configuration, click the Save icon.
Configure the private VLAN port mode
A port must be in the correct port mode to participate in a private VLAN.
Main User Manual
581
Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual