beautypg.com

NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 62

background image

5. Select System > Management > Management Interfaces > IPv6 Management

Interface Configuration.
The IPv6 Management Interface Configuration page displays.

6. From the Interface menu, select the interface that must become the IPv6

management interface.

7. Select the Set Management Interface option check box so that you can configure

the interface settings.

8. Select the Routing Mode Enable or Disable radio button to enable or disable routing

on the IPv6 management interface.

9. Select the IPv6 Enable Mode Enable or Disable radio button to enable or disable

IPv6 on the IPv6 management interface.

10. Select the Stateless Address Autoconfigure Mode Enable or Disable radio button

to enable or disable the on the IPv6 management interface.
You can enable this mode only if unicast routing is globally disabled.

11. Select the DHCPv6 Client Mode Enable or Disable radio button to enable or disable

the DHCPv6 client mode on the IPv6 management interface.

12. Click the Apply button.

Your settings are saved.

13. To save the settings to the running configuration, click the Save icon.

Note: If you need to reset the IPv6 management interface, in the Reset IPv6 Management
Interface section of the page, select the Set Management Interface to Default check
box and click the Apply button. Doing so deletes the IPv6 management interface
configuration.

The Current IPv6 Management Interface Status section displays the following
nonconfigurable fields.

Table 15. Current IPv6 management interface status information

Description

Field

The IPv6 management interface. (By default, no IPv6 management
interface is configured).

Management Interface

Indicates if the link status is up or down.

Link State

Indicates if the link status is up or down for the IPv6 management interface.

IPv6 Routing Interface
Status/Operational Mode

The MAC address that is assigned to the IPv6 management interface.

MAC Address

Main User Manual

62

Configure Switch System
Information

AV Line of Fully Managed Switches M4250 Series Main User Manual