NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 330)

Table 89. Qav settings information
Description Field
The current rate (in Bps) of class A traffic on interface Class A Bandwidth Allocated
The maximum rate (in Bps) of class A that is supported by the interface. Class A Remaining
Bandwidth
The current rate (in Bps) of class B traffic on interface Class B Bandwidth Allocated
The maximum rate (in Bps) of class B that is supported by the interface. CLass B Remaining
Bandwidth
The sum of the allocated class A and class B traffic rates (in Bps) on interface. Total Bandwidth Allocated
75 percent of the interface speed minus that total allocated bandwidth (in
Bps/sec). Total Remaining Bandwidth
View MSRP streams information
You can view information about MSRP streams that are flowing through each interface.
To view MSRP streams information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > MRP > Advanced > MSRP Streams Information.
The MSRP Streams Information page displays.
6. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable fields on the page.
Main User Manual 330 Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual