NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 740)

• Text Configuration: A text-based configuration file enables you to edit a
configured text file ( startup-config ) offline as needed. The most common
usage of text-based configuration is to upload a working configuration from a
device, edit it offline to personalize it for another similar device (for example,
change the device name or IP address), and download it to that device. This is
the default setting.
• Error Log: The switch error persistent log, also referred to as the event log.
• Buffered Log: The system buffered (in-memory) log.
• Trap Log: The trap log with the switch trap records.
• Script File: The script file that you must specify in the Local File Name field.
• CLI Banner: The CLI banner file.
• Tech Support: The tech support file is a text-based file that contains a variety of
hardware, software, and configuration information that can assist in device and
network troubleshooting.
• Crash Logs: The switch crash logs, if any are available.
• Backup Configuration: The backup configuration file is a text-based file.
• CPU Packets Capture File: The CPU packets capture file with the captured and
stored CPU packets.
• Factory Default Configuration: The factory default configuration file is a
text-based file with the stored factory default configuration.
• DHCP Client Configuration File: The DHCP client configuration file with the
DHCP server (host) information.
7. From the Transfer Mode menu, specify the protocol that must be used to transfer
the file to the server:
• TFTP: Trivial File Transfer Protocol.
• SFTP: Secure File Transfer Protocol. This selection requires you to specify a user
name and password.
• SCP: Secure Copy Protocol. This selection requires you to specify a user name
and password.
• FTP: File Transfer Protocol. This selection requires you to specify a user name and
password.
8. From the Server Address Type menu, select the format for the Server Address
field:
• IPv4: Indicates that the server address is an IPv6 address in dotted-decimal format.
This is the default setting.
• IPv6: Indicates that the server address is an IPv6 address in hexadecimal numbers
using 16-bit values between colons.
• DNS: Indicates that the server address is a host name.
Main User Manual 740 Maintenance and
Troubleshooting
AV Line of Fully Managed Switches M4250 Series Main User Manual