NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 361)

9. To save the settings to the running configuration, click the Save icon.
Display the IPv6 and ICMPv6 statistics for an IPv6 routing
interface
You can display the IPv6 and ICMPv6 statics for an IPv6 routing interface.
To display the IPv6 and ICMPv6 statistics for an IPv6 routing interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing> IPv6 > Advanced > Statistics.
The Statistics page displays.
6. From the Interface menu, select the IPv6 routing interface.
7. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable fields on the page.
Table 99. IPv6 interface statistics information
Description Field
The total number of input datagrams received by the interface, including
those received in error.
Total Datagrams Received
The total number of datagrams successfully delivered to IPv6
user-protocols (including ICMP). This counter is incremented at the
interface to which these datagrams were addressed, which might not
be the input interface for some of the datagrams.
Received Datagrams Locally
Delivered
Main User Manual 361 Manage Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual