NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 507)

9. To save the settings to the running configuration, click the Save icon.
Configure a RADIUS accounting server
You can display and configure various settings for a RADIUS accounting server on the
network.
Add a RADIUS accounting server to the switch To add a RADIUS accounting
server to the switch and display or clear the RADIUS accounting server statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > RADIUS > Accounting Server
Configuration.
The Accounting Server Configuration page displays.
6. In the Accounting Server IP Address field, specify the IP address of the RADIUS
accounting server.
7. In the Accounting Server Name field, enter the name of the accounting server.
8. In the Port field, specify the UDP port number the server uses to verify the RADIUS
accounting server.
The range is from 1 to 65535.
9. From the Secret Configured menu, select Yes to add a RADIUS secret in the next
field.
After you add the RADIUS accounting server, this field indicates whether the shared
secret for this server is configured.
10. In the Secret field, type the shared secret to use with the specified accounting server.
11. From the Accounting Mode menu, select to enable or disable the RADIUS accounting
mode:
Main User Manual 507 Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual