beautypg.com

Dhcp relay and relay statistics – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 112

background image

DHCP relay and relay statistics

If the switch is functioning as a Layer 3 device, you can enable the Layer 3 DHCP relay
agent and let the switch relay DHCP messages between DHCP clients and DHCP servers
that are located in a different IP subnet.

To configure a DHCP relay and display relay statistics:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Services > DHCP Relay.

The DHCP Relay page display.

6. in the Maximum Hop Count field, enter the maximum number of hops a client

request can take before being discarded.
The range is from 1 to 16. The default is 4.

7. Select the Admin mode Disable or Enable radio button to disable or enable the

DHCP relay on the switch.

8. In the Minimum Wait Time field, enter the minimum time in seconds that the DHCP

relay must wait before forwarding requests.
The time is compared to the time stamp in the client's DHCP request packets, which
represents the time since the client was powered up. Packets are forwarded only
when the time stamp exceeds the minimum wait time. The range is from 0 to 100.

9. Select one of the following Circuit ID Option Mode radio buttons:

• Enable: Relay agent options are added to requests before they are forwarded to

the server and removed from replies before they are forwarded to clients.

• Disable: R relay agent options are not added to requests before they are

forwarded to the server and not removed from replies before they are forwarded
to clients.

Main User Manual

112

Configure Switch System
Information

AV Line of Fully Managed Switches M4250 Series Main User Manual