beautypg.com

Delete one or all dynamic dhcp bindings, View bindings with dhcp conflicts – NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual

Page 109

background image

Table 31. DHCP bindings information (Continued)

Description

Field

The remaining lease time in days, hours and minutes (dd:hh:mm format).

Lease Time Left

The type of binding (Dynamic or Manual).

Type

Delete one or all dynamic DHCP bindings

To delete one or all dynamic DHCP bindings:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Services > DHCP Server > DHCP Bindings Information.

The DHCP Bindings Information page displays.

6. Select one of the following radio buttons:

• All Dynamic Bindings: All dynamic bindings must be cleared.
• Specific Dynamic Binding: In the field, specify the IP address of the dynamic

binding that must be cleared.

7. Click the Clear button.

The selected binding or bindings are deleted.

8. To save the settings to the running configuration, click the Save icon.

View bindings with DHCP conflicts

You can view information about devices with IP address conflicts. A conflict might occur
when the same IP address is assigned to two or more devices in the network.

Main User Manual

109

Configure Switch System
Information

AV Line of Fully Managed Switches M4250 Series Main User Manual