NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 295
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Ports > Port Configuration.
The Port Configuration page display.
6. Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
• 1: Only physical interfaces are displayed. This is the default setting.
• LAG: Only LAGs are displayed.
• All: Both physical interfaces and LAGs are displayed.
7. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the
heading row.
8. From the STP Mode menu, select to enable or disable the Spanning Tree Protocol
administrative mode for the port or LAG.
The default is Enable.
9. From the Admin Mode menu, select to enable or disable the administrative mode
for the port or LAG.
For the port or LAG to participate in the network, you must select Enable. The default
is Enable.
10. From the LACP Mode menu, select to enable or disable the Link Aggregation Control
Protocol administrative mode for the port.
The mode must be enabled for the port to participate in link aggregation. The default
is Enable.
11. From the Autonegotiation menu, select to enable or disable the speed
autonegotiation mode for the port.
Main User Manual
295
Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual