NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) User Manual
Page 452
13. To save the settings to the running configuration, click the Save icon.
Delete a static multicast route for an IPv6 address
You can delete a static IPv6 multicast route that you no longer need.
To delete a static multicast route:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IPv6 Multicast > Static Routes Configuration.
The Static Routes Configuration page displays.
6. Select the check box for the static route.
7. Click the Delete button.
Your settings are saved. The static route is deleted.
8. To save the settings to the running configuration, click the Save icon.
Main User Manual
452
Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual