How to contact altera, How to contact altera -42 – Altera Transceiver PHY IP Core User Manual
Page 702
Date
Document
Version
Changes Made
November 2010
1.1
• Corrected address offsets in PMA Analog Registers. These are
byte offsets and should be: 0x00, 0x04, 0x08, 0x0C, 0x10, not
0x00, 0x01, 0x02, 0x03, 0x04.
• Corrected base address for transceiver reconfiguration control
and status registers in PMA Analog Registers. It should be
0x420, not 0x400.
• Corrected byte offsets in Custom PHY IP Core Registers and
PCI Express PHY (PIPE) IP Core Registers. The base address is
0x200. The offsets are 0x000–0x018.
July 2010
1.0
• Initial release.
How to Contact Altera
This section provides the contact information for Altera.
Table 21-1: Altera Contact Information
Contact
(24)
Contact Method
Address
Technical support
Website
www.altera.com/support
Technical training
Website
www.altera.com/training
Product literature
Website
www.altera.com/literature
Nontechnical support
General
Software
licensing
Related Information
•
www.altera.com/support
•
www.altera.com/training
•
www.altera.com/literature
(24)
You can also contact your local Altera sales office or sales representative.
21-42
How to Contact Altera
UG-01080
2015.01.19
Altera Corporation
Additional Information for the Transceiver PHY IP Core