Xcvr_tx_pre_emp_inv_2nd_tap, Xcvr_tx_pre_emp_inv_pre_tap – Altera Transceiver PHY IP Core User Manual
Page 643
Description
Specifies the second post-tap setting value.
Note: This parameter must be set in conjunction with
XCVR_TX_VOD
,
XCVR_TX_PRE_EMP_1ST_POST_TAP
,
and
XCVR_TX_PRE_EMP_PRE_TAP
. All combinations of these settings are not legal. Refer to the
Stratix V Device Datasheet for more information.
Options
0–15
Assign To
Pin - TX serial data
Related Information
•
This solution provides the mapping of the Transceiver Toolkit pretap settings to the Quartus II
transceiver QSF assignment.
•
XCVR_TX_PRE_EMP_INV_2ND_TAP
Pin Planner and Assignment Editor Name
Transmitter Preemphasis Second Tap Invert
Description
Inverts the transmitter pre-emphasis 2nd post tap.
Options
• TRUE
• FALSE
Assign To
Pin - TX serial data
Related Information
This solution provides the mapping of the Transceiver Toolkit pretap settings to the Quartus II
transceiver QSF assignment.
XCVR_TX_PRE_EMP_INV_PRE_TAP
Pin Planner and Assignment Editor Name
Transmitter Preemphasis Pre Tap Invert
UG-01080
2015.01.19
XCVR_TX_PRE_EMP_INV_2ND_TAP
19-49
Analog Parameters Set Using QSF Assignments
Altera Corporation